"

欢迎来到⚽_欧洲杯滚球✅亚洲最专业体育平台✅欧洲杯滚球,一款直播,赛事,于一体顶尖原生APP,欧洲杯滚球,非常注重客户体验��7*24H在线服务��邀请您入住��️‍��

<strong id="z3m2i"></strong>

  1. <dd id="z3m2i"><optgroup id="z3m2i"><noframes id="z3m2i"></noframes></optgroup></dd>

    <nav id="z3m2i"></nav><em id="z3m2i"></em>
      <li id="z3m2i"><object id="z3m2i"></object></li>

        1. "
          English | 添加收藏 | 设为首页
          您所在的位置:网站首页 > > 产品中心 > XLPE绝缘材料 > 硅烷交联绝缘料1KV及以下二步法硅烷交联含卤阻燃绝缘料 SEJ90-2-ZR
          1KV及以下二步法硅烷交联含卤阻燃绝缘料 SEJ90-2-ZR
          Two-step Silane Cross-linkable Halogenous Flame-retardant PE Insulation Compound (≤1KV) ...
          型号:0

          参考价:¥

          说明:如您对该产品感兴趣,请在此输入您的手机号将本产品的地址 发送至您手机上。
          Product description 产品描述和用途
          SEJ90-2-ZR is two-step silan cross-linkable PE insulation compound for low-voltage cables. It is a kind of insulations of low-voltage cables and control cables through  squeeze tube mold production process. It is made from silan grafted A, catalyst B and halogenous flame-retardant masterbatch SEJ90-ZR. The density of SEJ90-ZR is 1.82±0.2g/cm3,the proportion between A and B is 95:5. The
          Adding amount of flame-retardant masterbatch changes according to the section surface sizes of the cables (10%~30%). It is mainly suitable for the cables of American Standards like XHH, XHHW, XHHW-2, RHH, RHW, RHW-2 and SIS. Large adding amount for small section surface size, and small amount for large section surface size. The general purposes are to make sure the cables pass horizontal burning test of UL-44. Working voltage for wire and cables are 1KV and below, the highest working temperature is 90℃.
          SEJ90-2-ZR是低压电线电缆用二步法硅烷交联聚乙烯绝缘料。主要用于通过挤管式模具生产的低压电力电缆和工业电缆的绝缘。该材料由硅烷接枝A料、催化剂B料、含卤阻燃母粒SEJ90-ZR 三部分组成,阻燃母粒密度为1.82±0.2g/cm3,接枝A料和催化剂B料的比例为95比5,阻燃母粒的添加量需根据电线电缆的截面积规格变化(10%~30%),主要是用于美标的XHH、XHHW、XHHW-2、RHH、RHW、RHW-2、SIS线缆,大截面电缆添加的较少,小截面积添加的较多,目的是要保证电缆通过UL-44的水平燃烧试验,电线电缆工作电压为1KV及以下,最高工作温度为90℃
           
          Processing Indicator 加工工艺  
          Recommend to process with the PE extruder.  建议使用聚乙烯专用挤出机进行加工。
          Model
          牌号
          Machine Barrel Temperature
          机筒温度
          Molding Temprature
          模头温度
          SEJ90-2-ZR 160-190℃ 195-200℃
           
          Physical and Electrical Properties 物理和电气性能
          Item
          试验项目
          Unit
          单位
          Technical requirements
          技术要求
          Tensile Strength
          拉伸强度
          MPa ≥10.5
          Elongation at Break
          断裂伸长率
          % ≥150%
          Brittle Temperature with Low Temperature
          低温脆化温度

          失效数
          -25
          ≤15/30
          20℃Volume Resistivity
          20℃体积电阻率
          Ω·m ≥1.0×1013
          Flammability
          燃烧性
          / 通过FT2水平燃烧
          Air Aging Condition
          热空气老化条件
          121±2℃×168h
          Tensile Strength Variation After Aging
          拉伸强度变化率
          % ±30
          Elongation Variation After Aging
          断裂伸长变化率
          % ±30
          Hot Set Test Condition
          热延伸试验条件
          200℃×0.2MPa×15min
          1mmthick 95 ℃ boiled 2 hours test
          一毫米厚95℃水煮
          2小时测试
          Hot Elongation
          负荷下伸长率
          % ≤100
          Permanent Deformation after Cooling
          冷却后永久形变
          % ≤5
           
           
          欧洲杯滚球
          <strong id="z3m2i"></strong>

          1. <dd id="z3m2i"><optgroup id="z3m2i"><noframes id="z3m2i"></noframes></optgroup></dd>

            <nav id="z3m2i"></nav><em id="z3m2i"></em>
              <li id="z3m2i"><object id="z3m2i"></object></li>